语言选择: 中文版 line 英文版

新闻中心

钛汽车螺栓

轻50%——耐腐蚀——耐疲劳

qīng 5 0 % nài shí nài láo


Titanium wheel lug nuts and Titanium wheel lug bolts are not only corrosion resistant but also much stronger and 50% lighter than steel lug nuts which results in a drastic decrease in rotational mass of the wheel. Lower weight in rotating parts such as lug bolts is over 8 times more effective than in a stationary part. Hence a 5 pound reduction in rotating mass is similar to removing 40 pounds anywhere else in the car. This decrease in rotational mass results in quicker acceleration and lower fuel consumption. The weight savings when using lighter lug nuts or bolts is equivalent to the weight savings achieved when using lighter wheels. In today's high performance applications where lightweight wheels are a must, why use standard steel lug nuts when you can use stronger and lighter Titanium wheel lug nuts and Titanium wheel lug bolts?

钛轮毂螺母和钛轮毂螺栓不仅具有耐腐蚀性,而且比钢轮毂螺母更坚固,重量轻50%,从而导致车轮旋转质量急剧下降。在旋转部件(如耳螺栓)中,较低的重量比在静止部件中有效8倍以上。因此,旋转质量减少5磅类似于在车内其他地方减少40磅。旋转质量的降低导致加速更快,油耗更低。使用轻型车轮螺母或螺栓时的重量节省相当于使用轻型车轮时的重量节省。在当今的高性能应用中,轻量化车轮是必须的,为什么要使用标准的钢制车轮螺母,当您可以使用更坚固、更轻的钛制车轮车轮车轮螺母和钛制车轮车轮螺栓时?

tài lún luó tài lún luó shuān jǐn yǒu nài shí xìng ér qiě gāng lún luó gèng jiān zhòng liàng qīng 5 0 % cóng ér dǎo zhì chē lún xuán zhuǎn zhì liàng xià jiàng zài xuán zhuǎn jiàn ěr luó shuān zhōng jiào de zhòng liàng zài jìng zhǐ jiàn zhōng yǒu xiào 8 bèi shàng yīn xuán zhuǎn zhì liàng jiǎn shǎo 5 bàng lèi zài chē nèi fāng jiǎn shǎo 4 0 bàng xuán zhuǎn zhì liàng de jiàng dǎo zhì jiā gèng kuài yóu hào gèng shǐ使 yòng qīng xíng chē lún luó huò luó shuān shí de zhòng liàng jié shěng xiāng dāng shǐ使 yòng qīng xíng chē lún shí de zhòng liàng jié shěng zài dāng jīn de gāo xìng néng yìng yòng zhōng qīng liàng huà chē lún shì de wèi shén me yào shǐ使 yòng biāo zhǔn de gāng zhì chē lún luó dāng nín shǐ使 yòng gèng jiān gèng qīng de tài zhì chē lún chē lún chē lún luó tài zhì chē lún chē lún luó shuān shí


6AL4V Titanium properties include a tensile strength of 1000 MPa (megapascals) which is the equivalent of 145000 psi. By comparison, annealed type 316 stainless steel has tensile strength of only 570 MPa (82670 psi), tempered 6061 aluminium alloy has tensile strength of 310 MPa, and Grade 1 Titanium has a tensile strength of only 240 MPa (34809 psi).

6Al4V钛的性能包括1000兆帕(兆帕)的拉伸强度,相当于145000磅/平方英寸。相比之下,退火316型不锈钢的拉伸强度仅为570兆帕(82670磅/平方英寸),回火6061铝合金的拉伸强度为310兆帕,1级钛的拉伸强度仅为240兆帕(34809磅/平方英寸)。

上一个:钽在原子能工业中的应用 没有下一个

联系我们

CONTACT US

联系人:吴经理

手机:86-18690401137 QQ 2244385626

电话:86-0917-3658839

邮箱:info@xbymetal.com

地址: 陕西省宝鸡市高新区宝钛路56号

用手机扫描二维码关闭
二维码